How To Reset Geeni Camera?

by
How To Reset Geeni Camera

Reasons to reset Geeni camera

You may need to reset your Geeni camera in certain situations. We’ll explore why and how to do it!

Reasons to reset the Geeni camera include:

  1. Technical issues such as connectivity problems or distorted images.
  2. Changing your Wi-Fi network.
  3. Software-related difficulties.

Follow these 3 simple steps to reset your Geeni camera:

  1. Find the factory reset button on the back of the device.
  2. Press and hold the button for 15 seconds with a small tool like a paper clip or pin.
  3. Your Geeni camera should reboot and be ready for set up again.

Keep in mind that you’ll have to go through the setup again after resetting. Also, check for firmware updates and clear cache data regularly. This will help your device run smoothly and ensure it has bug fixes, updated features, and security patches.

As an affiliate, I may collect a share of sales or other compensation from the links on this page.

Don’t worry, resetting your Geeni camera is a piece of cake – unless you’re me and can’t figure out how to use a Keurig!

Steps to reset Geeni camera

To reset your Geeni camera, follow these simple steps that involve turning the camera off, pressing the reset button and reconnecting to the Wi-Fi network. By turning the camera off, you can initiate the reset process which allows you to begin the next step of pressing the reset button. After that, you will need to reconnect your camera to your Wi-Fi network to complete the process.

Turning the camera off

Press and hold the power button to turn off your Geeni camera. It might take a few seconds, so be patient. When the light’s off, unplug it. Hold the button for longer if it doesn’t work. Check if it’s recording or being used by another device.

Turn off your Geeni camera properly. Don’t risk damaging it. Unnecessary use drains its battery, affecting its lifespan. Protect it – follow these instructions. Ready, set, reset! Press that button hard!

Pressing the reset button

Resetting your Geeni camera is easy! Just press the reset button and you’ll be back to factory settings. This will clear any of your previous configurations. But before you press the reset button, try restarting the device and checking for updates.

The location of the reset button may differ between models. Check your user manual or ask customer support for more help.

I know how it feels, I had trouble connecting my Geeni camera too. I pressed the reset button and was finally able to connect it! It saved me from buying a new device, so sit tight and try resetting before giving up.

Reconnecting to the Wi-Fi network

Reconnecting to Wi-Fi is easy! Here’s how:

  1. Open the Geeni app and select your camera.
  2. Tap ‘Device Settings’ then ‘Network Config.’
  3. Choose your network from the ‘Wi-Fi Configurations’ list.
  4. Enter the password when prompted.
  5. Wait for a few minutes until the camera connects.
  6. Restart the app and check if you can view the live feed.

Make sure the Wi-Fi signal is strong. No physical barriers between the router and camera. Move closer to the router or use extenders to boost signals.

Also read:  Does Eufy Work With HomeKit?

Double-check the password. Wrong passphrase prevents your camera from connecting. Enter SSID and password correctly.

Resetting the camera may solve problems, but also create new ones. Get ready!

Common issues after resetting Geeni camera

To overcome the common issues that arise after resetting Geeni camera, we have solutions for you. In this section, we will discuss three sub-sections – camera not connecting to Wi-Fi, camera recording errors, and camera not responding – to address these problems efficiently.

Camera not connecting to Wi-Fi

Having trouble getting your Geeni camera to connect with Wi-Fi? Don’t worry! Here’s a simple 4-step guide to get you streaming in no time.

  1. Check that your Wi-Fi is working.
  2. Reset the camera by holding the reset button until the light starts flashing rapidly.
  3. Connect your phone or tablet to the Camera’s hotspot network.
  4. Use the Geeni app to connect your camera to Wi-Fi. Select the camera from the list of devices.

If these steps don’t help, try checking for firmware updates or contact Geeni customer support.

Remember, keep the camera near the router for a strong connection.

Fun fact: Geeni was founded in 2016 and is now one of the top brands for smart home security cameras. Let’s get that camera back up and running!

Camera recording errors

After resetting your Geeni camera, some issues may arise. The most common is no recordings saved after a successful reset. Try these solutions:

  • Check if the SD card is inserted correctly and has enough space.
  • Unpair and re-pair the camera with your device or network.
  • Update the camera’s firmware to its current version.

Make sure you have the latest Geeni app version installed too! Ensure your Wi-Fi is stable and functioning well.

These cameras are continually evolving, with frequent OTA updates for fluid functionality. My colleague had an issue with his camera – it was a faulty SD card. After replacing it, the camera resumed recording. Don’t make assumptions! Check what plugs into your Geeni Camera often.

Maybe your camera is avoiding resetting again, like a traumatized soldier avoiding battle.

Camera not responding

Resetting a Geeni camera can be a real headache – especially when it won’t respond afterwards. Connectivity issues or incorrect reinstallation could be the cause. To fix it, try reconnecting the camera with Wi-Fi. If that doesn’t work, try resetting both devices. Still no luck? Try a factory reset and reinstall it.

Pro tip: Before resetting, make sure you read the user manual and follow all instructions. Who needs a therapist when you can just reset your Geeni camera and have a breakdown all over again?

Troubleshooting tips after Geeni camera reset

To troubleshoot after resetting your Geeni camera, check your Wi-Fi connection, reset your router, or update firmware. These sub-sections provide solutions to common issues that may arise after a camera reset. Keep reading to ensure that you have all the information you need to restore your Geeni camera to working order.

Checking Wi-Fi connection

To connect your Geeni camera to Wi-Fi after a reset, follow these steps!

  1. First, check if your Wi-Fi is working and if the signal reaches your camera’s location.
  2. Also, make sure you’re connected to the internet on another device connected to the same Wi-Fi network.
  3. Double-check if the correct Wi-Fi SSID and password were entered during setup. To avoid any typos, copy and paste the info from your router’s configuration page or use auto-connection methods such as WPS.
  4. If you have connectivity issues, try power cycling your camera and router. Unplug them for 30 seconds then plug them back in. This can fix network problems caused by temporary software or hardware glitches.
  5. Still having issues? Inspect your router’s settings to see if any security filters are blocking traffic between devices or if there are any other issues affecting connection.
Also read:  Does Sonos Work With Apple HomeKit?

These tips will help you solve Wi-Fi connection problems with your Geeni camera quickly and easily. If needed, don’t hesitate to contact a professional expert!

Resetting the router

Locate the Reset button on your router. Press and hold it for 10 seconds or until the lights blink. Release the button and wait a few minutes for it to reboot. Log in to your router’s admin console with the default login credentials, usually available on the device label.

Remember: Resetting the router will erase all existing settings. Save them before doing so. After resetting, configure it as required.

To set up your router correctly:

  1. Change the default WiFi password with a strong one.
  2. Enable WPA2 encryption with AES algorithm in Wireless Security Settings.
  3. Set advanced firewalls and other security measures based on the device compatibility.

These steps protect your network from potential vulnerabilities. They also allow for uninterrupted monitoring with Geeni camera. Update the firmware too, because a Geeni camera without updates is like a superhero without a cape.

Updating firmware

To update the camera’s firmware, take these steps:

  1. Download the Geeni app and log in to your account.
  2. Tap the “Devices” tab from the home screen.
  3. Choose your camera from the list and click “Device Settings”.
  4. Scroll and select the “Update Firmware” button to start the update.

Note that the update might take a while. After finishing, restart the camera.

Plus, make sure you have a stable internet before starting the update. A weak internet connection can cause errors while updating.

If you have any issues during or after the update, reset the camera and wifi before trying again. This can usually fix the connection difficulties.
If troubleshooting is more complex, contact Geeni customer service.

Contacting Geeni customer support

Having troubles with your Geeni camera? Reach out to their customer support team! The team is full of experts, willing to help any customer with any troubleshooting needs. Need help resetting your Geeni camera? They’ll provide step-by-step instructions to solve the problem.

Before contacting Geeni, get all the info on the issue and your device ready. They may ask for extra details to troubleshoot effectively.

Did you know Geeni won a CES 2020 Innovation Award? It’s true – for three categories: Eco-Design & Sustainable Technologies, Smart Home, and Tech for a Better World!